MG Gundam Deathscythe Hell "The Devil" WIP part 10(Final update!!!)

Ok guys,this is going to be a short update,I need to go back to work asap as there are still many things to be finished in just less than 2 weeks.
I finished applying the debris and here is the picture of the whole diorama.I will just briefly talk about the method i used to apply the debris.For more information,you can go check out dc23's tutorial here [url]http://dc23-mecharts.blogspot.com/2011/02/mg-zeta-wip-more-damage-effects-to.html[/url].

Apply polyester putty to places you want to add the debris and add small pieces of tubes and pla plates onto it randomly,gently press them down.Then sprinkle some sand onto it and press them down gently again.Wait for the putty to dry and remove the excess sand and tubes.DC23 uses epoxy pioneer which i do not have,so I went with polyester putty which dries kinda fast,so if you are using this add less hardener and add some thinner to the mixture.

The last step is to torch them lightly with flame.When i was using the candle,i thought of using the melted wax as molten steel on the diorama.Haha.

When i was making molten steel dripping down the pipe,the drip was too big so i used my finger nail to kinda sculpt it.I think this method can work,I just need to figure out how to control the size of the drip next time.

And here is the primed version of the diorama,and the molten effect looks ok.I did also redesign the scythe used in the diorama because it really look too plain.I just added some epoxy putty and sanded something similar to the other scythe.Hope you guys like it.

I have not posted photos of the wing in a long time because i need to focus on other mods,but since i'm almost finish with them,i have finally start adding details to the wing.I will start to painting the vents today and the wing should be fully painted in the next few days.

I'm sorry that the panel lines are hard to see,i should have taken a photo before i prime:(

So this will be my final update since its almost done,I may just post some spoiler photos,when i have the time.

There is one more thing that i need to talk about and that is the name,it sounds kinda boring so i went to think of some other name and i hope you guys can give me your thoughts on them.
1.The Devil
2..Devil,The Lawless One
3.The Lawless One
4.The Death-bringer

And lastly,I want to thank all of you guys for all the support you have given until now.If it wasn't for you guys,i may have stop this project long ago and this is the truth.Cheers!!!

Guys,go check out the finished model here!I hope you guys like it:)

MG Gundam Deathscythe Hell "The Devil" WIP part 8

Hello guys,welcome to another update.The progress for this week is kind of slow,but i think my interest for this is back,which is great.And this is all thanks to you guys who have been so supportive,thanks guys!

Ok,lets start with the scythe that was near to completion last week.I have added some details to the mod part using pla plate and panel lines,and it looks great.It was kinda bland last time and feels like there was certain things missing.

The tail gave me such a hard time because of the connectors.I had to make the segments longer so that they won't block each other.This was a problem that I knew from the start,but it is still a pain to solve it.When i drilled the back of segments,the epoxy would crack and I have to use polyester putty to fill them up and sand back to its shape.And one more thing,I still haven't thought of a nice design for the tip of the tail.Any ideas?

 After some cleaning...

 Extensions 

I guess it turned out not too bad...

By the way,I took out all the pipes from the pieces of launch pad because it looks weird with so many pipes.And I will have to rethink the shapes of each pieces,I think its too squarish now.What do you all use to saw large pieces like this?Those router saw is too small and hand saw is hard to use and it may break the thin plastic.

So look forward to the diorama next week,cheers guys:)

MG Gundam Deathscythe Hell "The Devil" WIP part 6

This is a short update,I didn't manage to do a lot this week.I started painting the body and is about halfway done.
I started painting the dark grayish purple parts first,because after priming,those parts have the least clean up needed.I'm almost finish with the silver and white parts also.

My shading is a little subtle,so I don't know whether you guys can see it in the pictures.

I mentioned that I will make a tail for this kit,and here is a section of it.I will have to recast this 8-9 times,because my previous method was unsuccessful.I thought that I could sculpt 10 of this and all of them will be similar,but I was so wrong...So I turned to the recast method after I sculpted one to my liking.I'm not very familiar with recasting so I hope it will work out this time.

I'm almost done with the wings,so give me maybe one more week and it should be finished.I also came up with some ideas on how to detail the scythe so look forward to that as well.Cheers:)